Water Level Measurement Devices

Water Level Measurement Devices provide accurate data on relevant water levels, measuring both static and dynamic water levels in a reliable and precise manner.Water Level Measurement Devices equipment composition: host, water ruler section, collector, power supply system, vertical pole

Water Level Measurement Devices working principle: Using the principle of weak conductivity of water, using advanced processor chips as controllers, obtain water level data through measurement electrodes, and transmit it through CPU digital encoding, indexing, sampling, and digital processing. Then, wired or wireless communication technology is used to send the water level data to the monitoring center or software, giving full play to the role of real-time monitoring and early warning of water level.

Power supply method: solar power supply, 30W, 20AH

Transmission method: 2G wireless transmission, optional 4G

Installation method: wall-mounted

Equipment accuracy 1cm (full range and other accuracy)

Resolution: 1cm

Unit section specification: 80cm

Measurement length: 80cm*4

Communication interface: RS485 is standard, and can be equipped with 4G, 4-20ma, 0-5v, 0-10v

Parameter configuration: Configuration tool configures specific parameters

Working mode: air height mode, water depth mode, tilt mode

Maximum power consumption: The maximum power consumption of the host is 1W, and the maximum power consumption of the water ruler is 0.05W

Control card: RS485 has a one-way relay output by default, and can be associated with any alarm output or used for water level upper and lower limit control.

Installation punching size: 86.2mm

Installation hole diameter: 10mm